Automated Pet Care Products LITTER-ROBOT Manuel - Page 12
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Automated Pet Care Products LITTER-ROBOT. Automated Pet Care Products LITTER-ROBOT 18 pages. Self-cleaning litter box
Également pour Automated Pet Care Products LITTER-ROBOT : Manuel (16 pages), Manuel de l'utilisateur (19 pages)
Imprimer la pageAutomated Pet Care Products, Inc.
Cleaning & Maintenance
The Litter-Robot requires no special maintenance. It is
recommended that you do not lubricate the Teflon glide
buttons on the Base unit. Lubricating these glide
buttons will allow dirt to build up.
Before you clean the Litter-Robot please make sure that
you remove all litter from the Globe - wet litter turns
into messy clay.
To remove the litter, press the "Empty" button on the
Control Panel. The Globe will rotate clockwise and the
litter will be discharged into the waste drawer. If some
litter remains in the Globe, you may need to push it out
manually, or turn the Globe to get all the litter out.
Globe
After removing litter from the Globe, clean with
water and a mild soap. There are no electronic
components in the Globe which can be damaged by
soap and water. If the Globe has become extremely
dirty, it can be soaked or cleaned with a water hose.
For routine cleaning, a damp soapy rag is probably
sufficient and will allow the Globe to dry quickly.
Drawer
The drawer can be removed and cleaned with soap
and water.
Base
Never submerge the Base. Wipe surfaces of the
Base with a cloth dampened with a disinfectant.
The Cat Sensor Switch (located at the front of the
40 W. Howard, Suite B-5, Pontiac, MI 48342
Toll Free: 877-250-7729 Fax: 248-253-1797
www.Litter-Robot.com
19
Automated Pet Care Products, Inc.
Base under the drawer) can get contaminated with
litter or dust. The Troubleshooting section shows
how to clean the contacts of this switch with WD-
40™.
20
40 W. Howard, Suite B-5, Pontiac, MI 48342
Toll Free: 877-250-7729 Fax: 248-253-1797
www.Litter-Robot.com