Automated Pure Water 400 Manuel d'installation et d'utilisation - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Automated Pure Water 400. Automated Pure Water 400 8 pages. Non-electric dry chlorine pellet feeder

Imprimer la page

1. Shut off water ahead of unit.

2. Open drain valve after FEEDER and relieve line pressure

3. Unscrew top (No. 4) and remove adjustment tube (No.

8) to DRAIN UNIT and replace with a clean tube and

cap (No. 7). To clean the removed tube & cap. Soak in

a mixture of Muriatic Acid. One part Muriatic Acid to

five parts water. Always pour the acid into the water.

ADHERE TO THE WARNINGS FOR HANDLING AND USE

OF MURIATIC ACID. Tube & Cap can also be cleaned by

soaking in white vinegar over night or longer.

4. If unit needs cleaning, loosen nuts (No. 14), turn unit

upside down and flush with water.

5. Fill with chlorine tablets to the bottom of cap (No. 7).

Do not till above bottom of cap (No. 7) and do not add

water to the unit or operation will be inhibited. It may

take a few pump cycles before chlorine is dispensed.

6. Replace top (No. 4) and close drain valve.

7. Tum on water.

NOTES:

If unit is opened after pressurization, it is neces-

sary to drain fluid to the bottom of cap (No. 7)

before repressurizing, or operation will be inhib-

ited. If unit is used for odor removal, do not refill

until odor returns to minimize chemical use.

DANGER: DO NOT MIX DIFFERENT TYPES OR BRANDS

OF CHLORINE AN EXPLOSION CAN OCCUR

CHLORINE is highly corrosive. Causes skin and eye dam-

age. May be fatal if swallowed and irritating to nose and

throat. Wear goggles or face shield and rubber gloves

when handling or opening the Model 400 feeder. Avoid

breathing dust. Remove and wash contaminated clothing

and shoes before reuse.

CAUTION: USE ONLY CALCIUM HYPOCHLORlTE CHLO-

RINE TABLETS FOR POTABLE WATER

# 10 ROF O-Ring

# 11 Non-Functioning Valve

# 20 Rate Of Feed Valve

# 9 Lock Clip

Refilling Information & Part Identification

# 16 Union O-Ring

# 15 1-1/2" Adapter

# 14 Union Nut

# 17 3/4" Adapter

-5-

# 1 Cover

# 2 Cap Screw

# 3 Spacer

# 4 Outer Lid

# 5 Inner Lid

# 6 Lid O-ring

# 7 Cap

# 8 Tube

Model 400 Installation & Operation Manual