Great Wall V200 Manuel - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Great Wall V200. Great Wall V200 19 pages. Keyless entry and immobilizer

X240 (Hover) Programming (PreFace Lift)

For the Module 3787100A-K00 and 3787100-K00-D1 (Vendor

Code VA-873D1)

1. Open the Drivers front door and insert the key into the ignition.

2. Turn the key from Off to ON 5 times finishing in the ON position.

3. The flashers will flash once to indicate programming mode has

been entered.

4. Push either the lock or the unlock button on the remote.

5. If successful, the flashers will flash Twice.

6. Repeat the above steps if you have more than 1 remote to

program.

For the Module 3787100-K00-D1 (Vendor Code VA-873DUP)

1. Open the Passengers front door and insert the key into the

ignition.

2. Turn the key from Off to ON 5 times within 5 seconds finishing in

the ON position.

3. The flashers will flash once.

4. Wait (approx. 5-8 seconds) until the flashers flash once again and

then turn the key Off and On 3 more times finishing in the ON

position.

5. The flashers will flash once more indicating that the programming

mode has been entered.

6. Push either the lock or the unlock button on the remote.

7. If successful, the flashers will flash Twice.

8. Repeat the above steps if you have more than 1 remote to

program.