DAYTEK MINI Manuel du produit - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel du produit pour {nom_de_la_catégorie} DAYTEK MINI. DAYTEK MINI 8 pages. Easy lock fold down clotheslines

Imprimer la page

INSTALLATION PROCEDURE (Continued)

2. MOUNT THE WALL BRACKETS

2.1 Use a Wall Bracket as a guide to mark the

fixing hole positions for one side of the

clothesline. (See Figure 2A)

Make sure to align the top hole of the Wall

Bracket with your height marker. Ensure that

the holes are vertically level. (See Figure 2B)

2.3 To mark the second wall bracket location,

slide one end of the Wall Attachment

Template over the top fixing (See Figure 2C),

pull tight and to the side (See Figure 2D) and

mark the wall bracket centre distance

(See Figure 2E).

2.4 Mark both fixing hole positions for the

second side of the clothesline using the

Wall Bracket as a template (See Figure 2F).

Drill the marked holes to suit your fixings.

2.2 Drill the marked hole positions to suit your

wall fasteners.

If you are using an anchor bolt, tap the bolt

into the holes as per the manufacturer's

instructions. Alternatively, if you are using an

anchor screw, insert the screw slightly into

the hole to complete step 2.3.

Ensure that the template is level and taught before

marking the location.

Note: we always recommend to confirm the correct

hole position with a tape measure and spirit level

before drilling. Confirm measurement against

Figure 1.

2.5 Secure both Wall Brackets firmly to

the wall. (See Figure 2G).

IMPORTANT! Ensure the head of the wall

fixings do not protrude more than 13mm.

13mm