Hibertek T20 Manuel de l'utilisateur - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Hibertek T20. Hibertek T20 9 pages. All in one pc

Troubleshooting

My All-in-one PC does not start

 Check that the All-in-one PC is connected to an electrical outlet and

it is turned on.

 Check that the power cord and all cables are connected firmly.

When I turn on my computer, the message "Operating system

not found" appears or Windows does not start

 Check if there is a non-bootable CD inside the optical disk drive. If

there is a non-bootable CD in the drive, remove the CD then restart

the computer.

 Check boot setting is the BIOS Setup Utility.

My LCD does not display anything

 Check that the All-in-one PC is connected to an electrical outlet and

it is turned on.

 The All-in-one PC may be in Standby mode. Press any key to activate

the display

My computer "locks up"

 Try restarting the All-in-one PC. On the Windows taskbar, click Start >

Turn off Computer > Restart.

 If your computer locks up while playing a DVD-ROW/CD-ROM, stop

the DVD ROM/CD-ROM, and restart the computer by pressing

Ctrl+Alt+Delete.

My DVD-ROM drive tray does not open

 Press the eject button on the DVD-ROM/CD-ROM drive.

 If the eject button does not work, open the tray by inserting a sharp,

pointed object into the hole next to the eject button.

My speakers have no sound

If you have connected an audio cable to the headphone



connector, disconnect the cable.

My computer does not shut down

It is the best to shut down your computer using the Shut Down

command. Using other methods, including those listed here, may result in

loss of unsaved data. If the Shut Down command does not work

properly, follow these steps:

 Restart the computer by pressing Ctrl+Alt+Delete.

 Press the power switch to turn off the power.

Unplug the All-in-one PC from the power adapter.