Daytona 58835 Manuel du propriétaire et consignes de sécurité - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire et consignes de sécurité pour {nom_de_la_catégorie} Daytona 58835. Daytona 58835 12 pages. Heavy duty bottle jack
Imprimer la page
18. Stay alert. Watch what you are doing, and
use common sense when operating a jack.
Do not use a jack while tired or under the
influence of drugs, alcohol, or medication.
A moment of inattention while operating
jacks may result in serious personal injury.
19. Store idle jacks out of reach of children
and other untrained persons. Jacks are
dangerous in the hands of untrained users.
20. Jack service must be performed only by
qualified repair personnel. Service or
maintenance performed by unqualified
personnel could result in a risk of injury.
21. When servicing a jack, use only identical
replacement parts - refer to attached,
product-specific parts list and diagram.
Follow instructions in the "Inspection,
Maintenance, And Cleaning" section
of this manual. Use of unauthorized
parts or failure to follow maintenance
instructions may create a risk of injury.
22. Maintain labels and nameplates on the
Jack. These carry important information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
23. Before use, read manufacturer's
instruction manual for the vehicle
(or object) you will lift.
24. When lifting only one wheel, support the
load immediately with one jack stand (not
included) placed under the side of the
vehicle being lifted. Align the saddle of
the jack stand directly under the vehicle's
seam or recommended lifting point.
Bottle Jacks
SAVE THESE INSTRUCTIONS.
For technical questions, please call 1-888-866-5797.
25. When lifting the entire front end or
rear end of a vehicle, support the load
immediately with two jack stands.
Align the saddles of the jack stands
directly under the vehicle's frame or
recommended lifting points. Also, adjust
the jack stands to the same height.
26. Do not work under the vehicle
without properly supporting the
vehicle with jack stands.
27. Avoid dangerous oncoming
traffic. Use the Jack as far away
from the roadside as possible.
28. Industrial applications must
follow OSHA requirements.
29. Do not allow anyone in the vehicle while
using the Jack. Keep all bystanders a
safe distance away from the vehicle.
30. Do not support both ends of the
vehicle at the same time.
31. Before lowering the Jack, remove all tools
and equipment from under the vehicle.
32. The warnings, precautions, and
instructions discussed in this manual
cannot cover all possible conditions
and situations that may occur. The
operator must understand that common
sense and caution are factors, which
cannot be built into this product, but
must be supplied by the operator.
Page 3