Automatic DB 5801 Manuel d'instruction - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Automatic DB 5801. Automatic DB 5801 13 pages. 250w multi tool

Imprimer la page

Using the scraper blade

1. Install the scraper blade on the multi-tool.

When using the scraper blade to scrape old finishes or

glue from a workpiece, place the underside of the blade

flat on the workpiece surface and then lift upward on the

rear of the tool to allow the blade to form a very slight angle

with the workpiece surface. Feed the blade slowly into the

material that is to be removed.

When using the scraper blade to cut carpet, place a

scrap workpiece under the carpet where the cut is being

made. Turn the tool so the scraper blade is at right angles

(perpendicular) to the carpet and then feed the blade into

the carpet.

Maintenance

WARNING: When servicing, use only identical

replacement parts. The use of any other part may create a

hazard or cause product damage.

If the replacement of the supply cord is necessary,this has

to be done by the manufacturer or its agent in order to

avoid a safety hazard.

DO NOT use solvents when cleaning plastic parts.

Plastics are susceptible to damage from various types of

commercial solvents and may be damaged by their use.

Use a clean cloth to remove dirt, dust, oil, grease etc.

WARNING: Do not allow brake fluids, gasoline,

petroleum-based products, penetrating oils, etc. to come

into contact with plastic parts. They contain chemicals that

can damage, weaken or destroy plastic.

DO NOT abuse power tools. Abusive practices can

damage the tool and the workpiece.

WARNING: DO NOT attempt to modify tools or create

accessories. Any such alteration or modification is misuse

and could result in a hazardous condition leading to

possible serious injury. It will also void the warranty.

Lubrication

All of the bearings in this tool are lubricated with a sufficient

amount of high-grade lubricant for the life of the unit under

normal conditions. Therefore, no further lubrication is

required.