Celect CC816WHB-0-DF Manuel - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Celect CC816WHB-0-DF. Celect CC816WHB-0-DF 5 pages. Radio controlled thermostat

Imprimer la page
Display
The LCD displays actual room temperature until the setting dial is moved.
Setting the temperature
Switch on the thermostat , turn setting dial to required temperature. The selected temperature will
flash in the LCD to signify it is showing the set temperature. After a short period the display stops
flashing and shows actual room temperature.
Heating mode
A heating symbol
will be lit whenever the thermostat is calling for heat and a "Heat on"
requirement signal will send to the receiver. The receiver will turn on the heating when there is no
error in communication.
The heating symbol
will disappear when the room temperature reaches the set points and a
"Heat off" signal will send to the receiver. The receiver will turn off the heating when there is no error
in communication.
The thermostat's display shows Er2 will show in the display when there is error in communication
between the receiver and the thermostat.
Low battery indication
A battery symbol
will flash in the display when batteries require replacement. Batteries should
be replaced within 15 days, after which the thermostat will turn off the load it is controlling. When this
happens "OF" will be displayed.
Error Code
E1 flashing in the display: Room sensor short circuit. Thermostat shut down all output
E2 flashing in the display: Room sensor broken. Thermostat shut down all output.
Er2 flashing in the display: Communication error between thermostat and receiver.
Page 4 of 5