HIBLOW hp-200 Manuel - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} HIBLOW hp-200. HIBLOW hp-200 8 pages. Air pumps
Également pour HIBLOW hp-200 : Manuel d'instruction (13 pages), Manuel d'instruction (17 pages)

Imprimer la page

HP- 150 / 200

CAUTION

！

●Be sure to unplug the pump unit.

●Replace the diaphragms and the valves with new ones at least once a year to one and

a half year regularly in order to maintain their initial performance.

●For chamber block replacement, be sure to change both chamber blocks at the same

time.

●The rod employs powerful permanent magnets. Therefore, be sure to remove your

watch and any other precision machines before operation as they may be affected by

the strong magnetic force.

●Do not put the actuating rod close to a magnetic card, magnetic disk or other magnetic

media as the data may be destroyed.

STEP

REMOVAL OF THE CHAMBER BLOCKS

To remove the upper housing.

(Refer to REMOVING UPPER HOUSING )

Remove the sound absorber.

STEP

Pull out the L-tube from the casing block.

STEP

Remove the 4 screws holding the chamber block

and the casing block.

(4 screws on each side)

REPLACING THE CHAMBER BLOCK