EmergoPlus PowerXtreme XS230 Manuel de l'utilisateur - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} EmergoPlus PowerXtreme XS230. EmergoPlus PowerXtreme XS230 15 pages. Solar set
Imprimer la page
User manual Solar set XS
For an esthetical nice result, you can apply tape to
▪
locations that you don't want glued.
Apply the distance tape to one of the surfaces to be
▪
glued. Remove the adhesive back of the tape.
The tape will ensure fixation during the curing of the
sealant. In addition, the tape ensures the required
adhesive thickness, which is 2-3 mm between the
adhesive surfaces.
Cut
the
▪
accompanying image. First cut it horizontally, then cut
out a red triangle.
Apply a triangle adhesive bead onto the surface to be
▪
glued. Keep the sealant tube at 90° relative to the surface.
Position the part and press the glue up to the desired glue
▪
thickness
Excessive glue can be removed or smoothed by use of an
▪
angled cut-off piece of PVC pipe. Before use, immerse the
pipe into water with detergent. Run the piece of pipe
across the adhesive bead to achieve a smooth result. You
can also lightly moisten the adhesive bead with a plant
E18-XSSolarset-EN-01
nozzle
of
the
of
www.emergoplus.com
sealant
tube
conform
2-3
Page 11 of 15
mm.