GreatCo EF72PEN Manuel d'utilisation - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} GreatCo EF72PEN. GreatCo EF72PEN 9 pages. Gallery electric fireplaces

Imprimer la page

INSTALLING YOUR FIREPLACE

Wall mounting bracket installation：

Open the box and take out the fireplace. The wall mounting bracket is attached to the back side of the fireplace.

Remove the screws holding it on at the bottom.

Choose a solid plain wall and put the bracket in the position where you want to install the fireplace. Mark holes with a

pen (6 for EF68/69PEN, 8 for GE70/72PEN) using the holes in the mounting bracket as a guide (Fig. 3)

If locating the fireplace on existing wall studs or solid wood walls, Screws can be inserted at this time and you can

proceed to step 6, otherwise continue the steps below for placing wall anchors.

Take away the bracket and then, using an 8mm drill bit, drill pilot holes in the wall. Put the plastic wall anchors into the

holes. (Fig. 4)

Insert the included long screws to secure the bracket to wall (Fig. 5)

406mm

90236AU GE50-94 REV B 4-26-13

406mm

Fig. 3

Fig. 5

IMPORTANT:

Install

orientation shown with mounting

hooks at the TOP of bracket as

shown by arrows

Fig. 4

the