GreatCo Gallery GBL-44 Instructions d'installation et manuel d'utilisation - Page 7

Parcourez en ligne ou téléchargez le pdf Instructions d'installation et manuel d'utilisation pour {nom_de_la_catégorie} GreatCo Gallery GBL-44. GreatCo Gallery GBL-44 8 pages.

Imprimer la page

Flame button

The fire has four flame effects and a standby, by pressing the flame effect button the unit will cycle through

each condition.

Heater button

Press once turns 650W power on. (Pilot lights illuminated ●○)

Press again turns 1300W power on (Pilot lights illuminated ●●)

Press third time turns heater off. (Pilot lights illuminated ○○)

To Reset the Heater

Your heater includes a protection system that shuts off the heater if it overheats for any reason:

1) Turn unit to off.

2) Wait 5 minutes.

3) Turn on.

●

Remote control functions

In order to protect the product from becoming too hot, there is an 8s delay when turning on the heater;

also there is an 8s delay when turning off the heater fan.

Make sure the batteries are installed properly in the remote control.

The effective range of the remote control is up to 13 feet (4 meters) .

ICON

TITLE

POWER

FLAME

HEATER

TEMP

TIMER

Press once turns appliance and flame effects on. Press

again turns appliance and flame effects off.

The fire has four flame effects, by pressing the flame

effect button the unit will cycle through each effect.

Press once turns 650W power on. (Pilot lights

illuminated ●○)

Press again turns 1300W power on (Pilot lights

illuminated ●●)

Press third time turns heater off. (Pilot lights illuminated

○○)

Digital display shows the TEMP setting 23°C (73°F)

(default), with 14 settings circle from "OFF", "16°C"

to "28°C" (61°F to 82°F).

The TEMP will increase by 1°C/F up to 28°C(82°F) when

pressed each time.

By pressing the TEMP for 3S, the digital display can

switch between °C and °F.

Cycles from OFF, 0.5H, 1H, 2H, 3H, 4H, 5H, 6H, 7H,8H,

to 9H.

FUNCTION