IGS MBG-N5.5 Manuel d'utilisation et d'entretien - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} IGS MBG-N5.5. IGS MBG-N5.5 11 pages.

This Operation and Maintenance Manual is for use with the IGS Microbubble

Generator (MBG) and provides the necessary information to successfully install

and operate the unit in accordance with manufacturers direction.

The MBG unit consists off

 Full metal casing with vents

 Priming pump

 Main cavitation pump specifically designed to purpose

 Cavitation cylinder and pressure gauge

 On board electrical control enclosure



Actuators to assist in control of unit for bubble generation

 Suction hose that connects foot valve to inlet

 Suction Hose that connects foot valve to primer pump

 Foot valve in cage

 High pressure delivery hose with diffuser

Model Reference

The model reference for this product is

IGS MBG-N5.5

The IGS Microbubble Generator is designed to sit above the water level of the

water body to be aerated. Both suction and delivery hoses need to downwards

to the water. Under no circumstances should these hoses be raised above the

unit itself - e.g., over the top of a tank. To do so reduces the efficacy of aeration

substantially.