Celerity FOG-RXCB Manuel de l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Celerity FOG-RXCB. Celerity FOG-RXCB 8 pages. Fiber optic gateway (fog)

Imprimer la page

User Guide

09/2014

Making Connections

Transmitter Connections - FOG-TXCB

HDMI High Speed cable (not included) from HDMI source component (Blu-ray, set-top box, etc) to HDMI input (port 2) on

FOG-TXCB.

Connect a DB-9 to RJ45 cable (not included) from the RS232 component (AV controller, computer, etc) to the FOG-TXCB

"RS232" input (RJ45 female, port 7), connect with a CAT5/6 cable to the precise length required (refer to the RJ45-DB9

diagram).

Connect an IR emitter (included) to the IR TX port (port 3). IR information sent from the FOG-TXCB connected to FOG-

RXCB will be emitted for the purpose of controlling a component with an IR remote (place the emitter over a component' s

IR window).

Connect an IR receiver (included) to IR RX port (port 4). The IR receiver will send IR information from the FOG-TXCB to the

FOG -RXCB for the purpose of controlling a component attached to the FOG-TXCB.

Connect USB cable to host device (computer) (port 5).

Connect Ethernet cable (not included) from your network to FOG-TXCB "Ethernet" input (RJ45 female, port 6).

Connect USB power cable and USB-AC adapter from FOG-TXCB (port 8) to AC main power connection. The blue LED on

the top panel of FOG-TXCB will illuminate when power is activated.

Receiver Connections - FOG-RXCB

Connect HDMI High Speed cable (not included) from HDMI display component (HDTV, etc) to HDMI output on FOG-RXCB.

Connect a RJ45 cable (not included) from FOG-RXCB "RS232" output (RJ45 female, port 7) to the required RS232 connector

port on the component to be controlled (HDTV, etc), connect with a CAT5/CAT6 cable to the precise length required.

Connect an IR emitter (included) to the IR TX port (port 3). IR information sent from the FOG-RXCB connected to FOG-

TXCB will be emitted for the purpose of controlling a component with an IR remote (place the emitter over a component' s

IR window).

Connect an IR receiver (included) to IR RX port (port 4). The IR receiver will send IR information from the FOG-RXCB to the

FOG-TXCB for the purpose of controlling a device attached to the FOG-RXCB.

Connect USB cable (not included) to the USB HID product such as touchscreen display, keyboard or mouse (USB, port 5).

Connect Ethernet cable (not included) from FOG-RXCB "Ethernet" input (RJ-45 female, port 6) to the Ethernet port on the

receiving component.

Connect USB power cable and USB-AC adapter from FOG-RXCB (port 8) to AC main power connection. The blue LED on

the top panel of FOG-RXCB will illuminate when power is activated.

NOTE:

RS232, and Ethernet are bidirectional and may be connected in the best way to fit a particular application