GAI-Tronics 226S Manuel - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} GAI-Tronics 226S. GAI-Tronics 226S 8 pages. Tough s.m.a.r.t. phones

Imprimer la page
Models 226S and 227S Tough S.M.A.R.T. Phones
7. Verify proper termination of the half-modular telephone cord to terminal board TB1 for the method
of flash control in use. See Figure 2.
4
TO EARTH SAFETY GROUND
3
GND
2
RD
RING
1
GR
TIP
TIMED-BREAK FLASH CONTROL
8. Fish the free end of the half-modular telephone cord through the conduit.
9. Replace the front panel assembly, and tighten the eight front panel screws.
10. Connect the free end of the half-modular telephone cord to the incoming subscriber line using a
Universal Service Order Code (USOC) RJ11C jack (USA) or CA11A jack (Canada).
11. Check telephone operation by calling to and from another phone.
f:\standard ioms - current release\instr. manuals (42004)\42004-313b effective 5-2.doc
04/01
Figure 1. Model 226S S.M.A.R.T. Phone
GND
RING
TIP
7-FOOT
HALF-MODULAR CABLE
Figure 2. Terminal Board TB1
4
3
2
RD
1
GR
7-FOOT
HALF-MODULAR CABLE
EARTH LOOP FLASH CONTROL
Pub. 42004-313B
Page: 4 of 7