Dynafold PF-370 Manuel d'utilisation - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Dynafold PF-370. Dynafold PF-370 16 pages. Automated setup folding machine
Imprimer la page3.
Adjustment
of
paper
feed pressure:
lf
paper quantity
is small,
adjust
the
paper
feed
pressure using paper support
lift.
Pull
it
up
and
then move right
to
increase
the pressure. Pull
it
up and
then
move
left to
decrease
the
pressure.
(Picture
11)
Pictu
re
11
4. Selecting
the
paper
size
and
folding
type:
When
the
power switch
is
turned on,
the baffles on the
upper/lower folding
plates
will
move
to
the
"A4
Single
fold"
or
"Letter Single
fold"
position
automatically.
lf
you
are
going
to
use any other paper size and
fold
type,
follow the instructions
below.
<For
standard size papers
>
For
the standard paper sizes and fold types, which are preset in the
memory,
select
the
proper position
for the
paper
size and the fold type on
the
self-defined display by pressing any of the 4 cursor
keys.
Note:
The preset paper sizes
are;
PF-330/340- A4
(297x21
0mm), A5 (210x148.Smm), Letter
(279x21 6mm)
and Legal
(356x216mm)
P'F-3701380-A3 (297x42Amm),
A4
(297x21 Omm),
A5
(21
0x148mm)
Ledger (17
x
11"), Legal (14x8.5")
and Letter (11x8.5")
I
<Non-standard size papers
>
Firstly, enter
into
"self-de,fined nnode".
(Page
1
0)
Then, choose
one
self-defined area
(I-Iv),
then press the SET key. The upper and lower folding
plates
will
enter a self-defined position. After that, enter into "Fine adjustment
under Setf-defined mode". (Page
12)
Note: The adjusted position can be memorized. (See
the details on
Page
11)
-8-