GAI-Tronics Clean Phone 295F Manuel - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} GAI-Tronics Clean Phone 295F. GAI-Tronics Clean Phone 295F 19 pages.
Imprimer la page
- 1. General Information
- 2. Safety Guidelines
- 3. Installation
- 4. Programming Information
- 5. Local Programming
- 6. Remote Programming
- 7. Programming Instructions
- 8. Programming Table
- 9. Incoming Calls
- 10. Outgoing Calls
- 11. Operating Instructions
- 12. User Instructions
- 13. Specifications
- 14. Replacement Parts
- 15. Warranty
- 16. Return Policy
Model 295F and 295W Clean Phone™ Telephone
Installation
Feedback problems can be avoided by installing each clean telephone in a separate room and wall.
Model 295F Mounting and Wiring
1. Refer to Figure 6 on page 17 for a drilling template.
2. Use the template dimensions as a guide to mark the wall, and make the required cuts.
3. Place the back bracket in the wall. Locate the mounting holes.
4. Drill two holes in the lower right corner and the upper left corner, to secure the bracket. Drill the rest
of the holes you intend to use, and secure the remaining holes.
5. Feed the wiring through the supplied bushing.
6. Snap the cover off of the modular wall jack. Refer to Figure 1 as a wiring guide. Wire the incoming
tip wire to the green wire of the modular jack. Wire the incoming ring wire to the red wire of the
modular jack, the (COM) wire to the yellow wire of the modular jack, and (-48 V) wire to the black
wire of the modular jack.
d:\standard ioms - current release\42004 instr. manuals\42004-146h.doc
11/05
Figure 1. Modular Wall Jack Wiring for Model 295F
Pub. 42004-146H
3 of 17
Page: