GreatLite Professional Series Mode d'emploi et manuel des pièces détachées - Page 2
Parcourez en ligne ou téléchargez le pdf Mode d'emploi et manuel des pièces détachées pour {nom_de_la_catégorie} GreatLite Professional Series. GreatLite Professional Series 4 pages. Led flashlight
Imprimer la pageoperating Instructions and Parts manual
Thank you very much for choosing a GreatLite
Product!
For future reference, please complete the owner's
record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is
important that you read the entire manual to become
familiar with this product before you begin using it. We
strongly recommend this flashlight is not modified and/
or used for any application other than that for which it
was designed. If you have any questions relative to a
particular application, DO NOT use the flashlight until
you have first contacted GreatLite to determine if it can
or should be performed on the product.
ImPortANt INstrUCtIoNs
AND sAFetY rULes
1. Know your flashlight. Read this manual carefully.
Learn the flashlight's applications and limitations,
as well as, potential hazards specific to it.
2. Keep work area clean and well lit. Cluttered or dark
work areas invite accidents.
ProDUCt sPeCIFICAtIoNs
PArt sPeCIFIC INstrUCtIoNs
- Uses Cree XM-L (T6) LED bulb, service life is 100,000 hours
- Uses (1) 18650 battery
- Size: 5.4" (Length) x 0.9" (Diameter) x 1.1" (Head)
- Net weight 77.5 g (0.171 Lbs.) (excluding battery)
- Constant current circuit, constant brightness
- Non-slip design body
- Made out of aircraft aluminum
- Surface anti-wear treatment is done by using hard anodizing
- Uses ultra-clear glass lens with anti-reflective coating creates bright light
800 Lumens
400 Lumens
2 Hr
4 Hr
(1) 18650 Battery, Pocket Clip, Lanyard, Spare O-Rings
ProFessIoNAL serIes
e36-e02 LeD FLAshLIGht
3. Keep children away. All children should be kept
away from the work area. Never let a child handle
a tool without strict adult supervision.
4. Use safety equipment. Eye protection should be
worn at all times when working this tool. Use ANSI
approved safety glasses. Everyday eyeglasses are
NOT safety glasses. Dust mask, non-skid safety
shoes, hard hat, or hearing protection should be
used in appropriate conditions.
5. Always disconnect the tool from the power source
before making any adjustments, storing, servicing,
or changing accessories. Such preventative safety
measures reduces the risk of starting the tool
accidentally.
6. Do not use the flashlight if the switch does not turn
it on and off. Any tool that cannot be controlled
with the switch is dangerous and must be repaired.
7. Check for damage. Check your flashlight and
batteries regularly. If part of the flashlight is
damaged it should be carefully inspected to make
sure that it can perform its intended function
correctly. If in doubt, the part should be repaired or
replaced.
8. Keep away from flammables. Do not attempt to
operate this flashlight near flammable materials
or combustibles. Failure to comply may cause
serious injury or death.
Strobe
80 Lumens
7 Hr
300 M
1.5 M
IPX-6
2
eXPe36-e02