GAI-Tronics KETS 1141 Manuel d'installation et d'utilisation - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} GAI-Tronics KETS 1141. GAI-Tronics KETS 1141 20 pages. Titan illuminated crossing telephone

Imprimer la page

Connections

If glands are used, insert the cable through the gland body and tighten the gland nut

sufficiently to clamp the cable, making a seal. Ensure sufficient cable is left to allow

removal of the faceplate without straining the cable.

IMPORTANT: If only one cable entry is used, the BLACK blanking plug fitted to

the second position must be left in place.

Connect the telephone line A and B to the main terminal block TB2 as shown.

The centre earth terminal is intended as an optional connection to a local

earth for the purpose of enhanced protection from lightning transients, and is

not required in terms of user safety from the telephone network.

Note: Conductor sizes to be 0.5mm-2.5mm

(solid cable) The terminal block can be disconnected from the circuit board

for easier installation

Cabling must not infringe European Low Voltage Directive (LVD)

2006/95/EC.

(flexible cable);0.5-4.0mm

KETS 1141 Titan Illuminated Crossing Telephone