DayTronic M2 Manuel de l'utilisateur - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} DayTronic M2. DayTronic M2 20 pages.

Imprimer la page

1. Assembly

1. Assembly
Please read the Safety advice on page 15 before installation and keep this user manual
for future reference.
1.
After removing the fixing elements, insert the device.
2.
Check the seal to make sure it fits securely.
3.
Click the fixing elements back into place and tighten the clamping screws by hand.
Then use a screwdriver to tighten them another half a turn.
CAUTION! The torque should not exceed 0.1 Nm!
The dimension symbols can be exchanged before installation via a channel on the side!
Gap for physical unit
2