GreatWhite GW9500 Manuel du propriétaire - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} GreatWhite GW9500. GreatWhite GW9500 12 pages. Automatic pool cleaner

Imprimer la page

ABOUT "FINE-TUNING" VACUUM ADJUSTMENTS AND CONNECTIONS:

Too much vacuum ?

You have too much vacuum if the cleaner climbs up the

pool wall past the water line to the point that the clean-

er sucks air and the pump loses prime. Frequent loss of

prime will damage the pump. To correct this, change

the black vacuum regulator cap marked "60" to the one

provided in your accessory bag marked "50". If the

cleaner still climbs out and sucks air, open the main

drain valve slightly.

Not enough vacuum ?

You don't have enough vacuum if the cleaner moves

sluggishly or not at all. Be sure the filter system is clean

and all valves are adjusted to give you maximum vacu-

um. If the cleaner is still not moving, your pump may

not be strong enough to operate the cleaner. Also,

please refer to the Troubleshooting guide on Page 7.

In-Line leaf canisters

If your pool is exposed to large quantities of leaves, we

suggest purchasing and installing an in-line leaf canis-

ter. A leaf canister will provide more debris-loading

capacity and also provides a water by-pass when the

canister is full. It is very important that the pump not

starve for water!

Dedicated suction line/vac port/vac fitting

Some pools have a dedicated wall fitting just for vacu-

uming. If the wall fitting connection is used, you may

notice that the clear pump lid shows signs of bubbles or

what appears to be the presence of air. To eliminate

this, slightly open the main drain valve to supplement

the water intake. The cleaner may slow down a bit

when you change the suction.

If you have any questions, please call 1-800-752-0183

Skimmer connection

Some pool owners remove the skimmer basket and

connect the hose directly into the bottom of the skim-

mer. This method is OK for pools with minimal debris

and also for screened in pools.

For pools that have large quantities of "big stuff" to

pick up, we suggest using the bottom of the skimmer

connection in conjunction with an in-line leaf canister

(purchase the cannister locally). A leaf canister will pro-

vide more debris-loading capacity and also provides a

water by-pass when the canister is full. It is very impor-

tant that the pump not starve for water!

Skimmer vac plates

Some pool owners connect the hose to a skimmer vac

plate, which allows the skimmer basket to remain in

the skimmer. If this method is used, empty the basket

frequently. Also make sure that the vacuum regulator

provided is completely submerged so that it will not

suck air and damage the pump.

Skimmer vac plate vacuum

control adjusters

Some pool owners use one of a variety of manufacturer's

skimmer vac plates. Some have a vacuum control ad-

juster, and some do not. The adjuster could be a screw-

type, a spring loaded apparatus, or a dial design. For

those vac plates with adjusters, it is important to adjust

them when fine tuning the vacuum for the cleaner.