GAI-Tronics 234WM-202 Manuel de l'utilisateur - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} GAI-Tronics 234WM-202. GAI-Tronics 234WM-202 13 pages. Wall-mount stanchion assembly

Imprimer la page

Model 234WM-202 Wall-Mount Stanchion Assembly

Model 84503-30x Stanchion Panel Light Installation

1. Align the stanchion panel light assembly inside the stanchion as shown in Figure 5.

2. Model 84503-301: Extend the black (hot), the white (neutral) and the green (ground) wires to the

base of the stanchion (these wires will be connected later, along with the strobe wires, to the incoming

power wires in accordance with the electrical codes).

Model 84503-302: Extend the black (−) and the white (+) wires to the base of the stanchion (these

wires will be connected later, along with the strobe wires, to the incoming power wires in accordance

with the electrical codes).

3. Secure the panel light assembly with the two mounting screws provided. Apply a small amount of

clear RTV silicone sealant or equivalent to each screw thread to reduce the possibility of rust forming

in the screw threads.

p:\standard ioms - current release\42004 instr. manuals\42004-308g.docx

04/16

Figure 5. Stanchion Panel Light Assembly

Pub. 42004-308G

Page 6 of 11