Dynalabs DYN-MS-20 Manuel du produit - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel du produit pour {nom_de_la_catégorie} Dynalabs DYN-MS-20. Dynalabs DYN-MS-20 14 pages. 20 n ms shaker

Imprimer la page
All rights reserved. Reproduction or issue to third parties in any form whatsoever is not permitted without written authority from the proprietors.

3.4) Shaker Mounting

The shaker is designed to rest on its rubber isolators. However, these
isolators can be removed for rigid or semi-rigid mounting. If it is not
possible to bolt down the shaker, hot glue is also a good mounting option.
The shaker can also be suspended by elastic bungee cords for lateral testing.
Additional inertial weight may be attached to the bottom of the shaker using
hot glue.

3.5) Power Requirements

DYN-MS-20 has an integrated power amplifier which is powered by its
power adaptor. Please note the output voltage and current ratings of the
adaptor in a replacement adaptor is to be used.

3.6) Cooling

DYN-MS-20 does not require forced cooling. Air convection cooling is
sufficient for the force levels given in the specifications.
11