AirCycler g2-k Manuel de test d'installation

Parcourez en ligne ou téléchargez le pdf Manuel de test d'installation pour {nom_de_la_catégorie} AirCycler g2-k. AirCycler g2-k 2 pages.
Également pour AirCycler g2-k : Manuel d'installation et d'utilisation (11 pages), Manuel de formation (20 pages), Manuel de test d'installation (2 pages)

Ventilation Products

Testing the AirCycler® g2-k completed installation is an easy

two step process:

STEP 1

Test the FanConnect

STEP 2

Test thermostat, damper and furnace connection and

operation

a. With the thermostat o , turn on the FanConnect

switch.

b. Con rm the exhaust fan is running.

c. The AirCycler

g2 display should show the

Exhaust fan is on and the OA damper is open.

d. Con rm the OA damper is open.

e. Turn o exhaust fan.

a. Make sure exhaust fan is o .

b. Turn thermostat FAN switch to ON.

c. Con rm AirCycler

damper open.

d. Con rm furnace fan is running.

e. Remover AirCycler

should shut o ..

f. DONE! Replace AirCycler

See reverse for troubleshooting tips and frequently asked questions

(tm)

connection & operation

STEP

g2 display show's FAN and OA

g2 from it's base. Furnace fan

g2 controller on it's base.

AirCycler® g2-k Installation Testing Guide

EXH - EXHAUST

FAN IS ON

VENTILATION COMPLETE

FAN ON FROM

THERMOSTAT

OA - FRESH AIR

DAMPER IS OPEN

PERCENTAGE OF

LCD DISPLAY

OA - FRESH AIR

DAMPER IS OPEN

PERCENTAGE OF

VENTILATION COMPLETE

LCD DISPLAY