GReddy Multi D/A Gauge Manuel d'instruction - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} GReddy Multi D/A Gauge. GReddy Multi D/A Gauge 8 pages.
Imprimer la page
6. Operation – Display
【 About display 】
○Each item shows the following ranges and values.
Display
Item
BOOST
Boost
WATER.T
Water temp
Oil temp
OIL.T
OIL.P
Oil press
FUEL.P
Fuel press
EXT.T
Exhaust temp
BATT
Voltage
【 Peak value display 】
○ During the real time display, if the peak button is
pressed, the boost display points the peak value;
the oil pressure display points the peak value and
the digital display as well.
○ While the meter pointing the peak value,
if another button was clicked, its peak value will
be shown.
Multi D/A Gauge stores updates after the power-off.
※
Please refer to "5. Remote setting – operation" for the peak value operations.
※
【 Warning settings 】
○During the real time display, press the warning setting button, select an objective
item, and switch to its warning value setting.
【 Warning behaviors 】
○ When each item reaches its preset value, "Warning action" performs.
"Warning action" when exceeding preset levels: Boost, Water temp,
Oil temp, Exhaust temp.
"Warning action" when being lower than preset levels:
Oil pressure, Fuel pressure, and Voltage.
・ Analogue display
Backlight flashing with warning sound.
・ Digital display
Item flashing with warning sound.
No warning sound if the item is not on the display
※
even if its in the preset warning value.
Please refer to "5.Remote setting – operation" for warning & sound settings.
※
MIN
MAX
Value
-100
250
kPa
0
150
℃
0
150
℃
0.0
12.0
×100 kPa
0.0
12.0
×100 kPa
0
12.0
×10 ℃
9.0
17.0
V
Current value
Display item
1 item display
While setting warning value,
! will display.
Backlight flashing
Analogue display
Bar indicator
Value
2-item display
↑ while pointing the peak value.
Press item button
while the peak value displays.
Digital display
Value
Current value
Item flashing