Automatica LINE SEIKI MB−5111 Manuel de démarrage rapide - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Automatica LINE SEIKI MB−5111. Automatica LINE SEIKI MB−5111 2 pages. Predetermining electric counter

Imprimer la page

OPERATING PROCEDURE

• Be sure to cut off the counting input (pulse) before resetting.

(Otherwise, counting operation or control output failure may take place).

1. SETTING THE PRESET VALUE

• The unit does not count during opening of the cover).

• Do not reset during operation and opening of the cover.

• Lubrication is not required.

1. While pressing the Reset Button, open the presetting cover by pressing the cover button.

2. Turn each of the Preset thumbwheels until desired setting is reached.

3. Close the presetting cover firmly after completion of presetting, while pressing the reset button.

4. If the presetting cover is open or is not closed completely, the output will not occur when preset is reached.

2. RESETTING

1. Prese the Reset Button until all displayed digits becomes "0".

2. Slowly release the reset button.

3. If the reset button is not completely pushed or not slowly relesed, it may cause incorrect operation.

MAINTENANCE AND REPLACEMENT

• If the digital numbers are hard to read due to sticking dirt, clean them with soft cloth moistened with neutral detergent.

(Do not use organic solvents or caustic soda which will affect the counter surfaces).

• Do not apply oil to the counter. Oil will affect smooth operation of the counter or gather dust that may cause trouble.

• If the counter should fail to operate normally, return it to us along with the details of the trouble.

CONNECTION

COUNT

COM

MB−4111

MB−5111

DIMENSIONS

FIGURE WINDOW

COVER BUTTON

62.4

PRESETTING WHEEL

COUNT

RESET

COM

MB−4211

MB−5211

RESET BUTTON WITH LOCK

9.5

DUST COVER

PRESETTING COVER

15.2

TERMINAL

CLAMP

PANEL CUTOUT

This catalog was last revised Apr. 19, 2010.

*Subject to change without prior notice.