Agrimate AM-K26708 Manuel d'utilisation - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Agrimate AM-K26708. Agrimate AM-K26708 12 pages.

STARTING

Fuel Mixture:

Use a 4% (25:1) oil-gasoline mixture.

(oil : two stroke oil or 20/50 engine oil)

Warning: two stroke engines have hing

specific horsepower and we therefore

recommend the use of well known, super

gasoline, with or without lead and an

octane rating of no less than 90. When

preparing the mixture, only use oil for two

stroke engines. Shake the fuel canister

before filling. Refill (Fig 7) when the

engine is switched off and far away from

naked flames. Before unscrewing the fuel

tank cap position the sprayer on a flat,

solid surface to prevent fuel spills. Only

prepare the quantity of mixture for each

job, do not leave the mixture in the fuel

tank or in a fuel canister for prolonged

periods.

Starting the engine:

Make sure that the throttle lever is in the

idle position. Fill the carburetor by

pushing the primer bulb (Fig 8-A). Put the

choke lever (Fig 9-B) in the "CLOSE"

position. Place the sprayer on the ground

in a stable position. Holding the sprayer

firmly (Fig 10), pull sharply on the starter

cord to start the engine. Wait a few

seconds then operate the throttle lever to

release the automatic semi-acceleration

device. The starter lever should return to

its original "OPEN" position.

Warning: once the engine is warmed

up, do not use choke to start up again.