AirCycler g2-k Manuel de formation - Page 18

Parcourez en ligne ou téléchargez le pdf Manuel de formation pour {nom_de_la_catégorie} AirCycler g2-k. AirCycler g2-k 20 pages.
Également pour AirCycler g2-k : Manuel d'installation et d'utilisation (11 pages), Manuel de test d'installation (2 pages), Manuel de test d'installation (2 pages)

7.0 INSTALLATION TESTING GUIDE

Testing the AirCycler® g2-k completed installation is an easy two step process:

STEP 1

Test the FanConnect

STEP 2

Test thermostat, damper and furnace connection and operation

STEP 1

a. With the thermostat off, turn on the FanConnect™

switch.

b. Confirm the exhaust fan is running

c. The AirCycler® g2 display should show the exhaust (bath)

fan is ON and the outside fresh air damper is open (OA)

d. Confirm the outside fresh air damper is open (OA icon)

e. Turn off exhaust fan

STEP 2

a. Make sure exhaust fan is off (delay time may be running and

EXH icon will show)

b. Turn thermostat FAN switch to ON

c. Confirm AirCycler® g2 display shows FAN and damper

open (OA).

d. Confirm furnace fan is running

e. Remove AirCycler® g2 from it's base. Furnace fan should

shut off

f. DONE! Replace AirCycler® g2 controller on it's base

connection & operation (if using FanConnect™ switch)

(tm)

EXH - EXHAUST

FAN IS ON

OA - FRESH AIR DAMPER

EXH

FAN ON FROM

THERMOSTAT

LCD DISPLAY

IS OPEN

PERCENTAGE OF VEN-

TILATION COMPLETE

IS OPEN

PERCENTAGE OF VEN-

TILATION COMPLETE

AC DOC 8.5

REV 7/2020