Automation Direct D0-05DD-D Pour commencer - Page 6

Parcourez en ligne ou téléchargez le pdf Pour commencer pour {nom_de_la_catégorie} Automation Direct D0-05DD-D. Automation Direct D0-05DD-D 13 pages.

Chapter 1: Getting Started

Quick Start for PLC Checkout and Programming

The following is example is not intended to tell you everything that you will need to start-up

your system, but is only intended to give you a general picture of what you will need to get your

system powered-up. Please review warnings and helpful tips by becoming familiar with the

content of the rest of the manual.

Step 1: Unpack the DL05 Equipment

Unpack the DL05 and gather the parts necessary to build this demonstration system. The

recommended components are:

• DL05 Micro PLC

• AC power cord or DC power supply

• Toggle switches or simulator module, F0-08SIM(see Step 2 on next page).

• Hook-up wire, 16-22 AWG

• DL05 User Manual (this manual)

• A small screwdriver, 5/8" flat or #1 Phillips type

You will need at least one of the following programming options:

• DirectSOFT Programming Software, DirectSOFT Manual, and a

programming cable (connects the DL05 to a personal computer), or

• D2-HPP Handheld Programmer (comes with programming

cable), and the Handheld Programmer Manual

1-6

DL05 Micro PLC User Manual, 6th Edition, Rev. E