HID EDGE EVO ESH400 Manuel d'installation - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} HID EDGE EVO ESH400. HID EDGE EVO ESH400 12 pages. Hi-o networked controller
Imprimer la page
EDGE EVO Hi-O Networked Controller
EH400
7
Power & Testing
Test the system once per year using the web Graphical User Interface to ensure all wiring and configuration is correct.
For additional installation information, such as PIR (Passive Infared Device) and other active Request-to-Exit (REX) devices, as
well as connecting fire relays, see http://www.hidglobal.com/edgesupport.
Hi-O Interface Modules
Hi-O interface modules are used to interface the EDGE EVO device (Controller / Reader & Module or Network Controller) with
door electronic components. Components include access control readers, strike, magnetic lock, request to exit, door position
switch, and auxillary devices.
For Hi-O interface module wiring, see their respective Installation Guides.
Go to
www.hidglobal.com
Search the document type as a Installation Guide.
Model
EDM-M
EIM-M
EWM-M
EDWM-M
ELM
EVM
Glossary
Acronym
AC Fail
AUX
BATT Fail
CAN_H
CAN_L
CLK
COM
Data0
Data1
Door Mon
DS
10
INSTALLATION GUIDE
> Support > Document Library.
Description
EDGE EVO Door Module
EDGE EVO Input Module
EDGE EVO Reader Module
EDGE EVO Door & Reader Module
EDGE EVO Lock Module
EDGE EVO Voltage Module
Description
AC Power Failure Input Sense
Auxillary Input or Output
Battery Failure Input Sense
Hi-O CANbus High
Hi-O CANbus Low
Clock
Common
Wiegand Data 0 Input
Wiegand Data 1 Input
Door Monitor Input
Door Strike
Part Number
82342
82340
82360
82363AM
82301
82365
Acronym
Description
GND
Ground
GRN LED
Green LED Output
GRP SEL
Group Select
NC
Normally Closed
NO
Normally Open
PIR
Passive Infared device
PoE
Power over Ethernet
RED LED
Red LED Output
REX
Request-to-Exit Input
RLY
Relay
©2009 - 2012 HID Global Corporation. All rights reserved.
82000-920, D.1