Celestron 31041 Manuel d'installation rapide

Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} Celestron 31041. Celestron 31041 2 pages. 3"/4.5" newtonian telesccope
Également pour Celestron 31041 : Manuel d'instruction (16 pages), Manuel de l'utilisateur (16 pages)

Imprimer la page

FirstScope 114

Compact

Item# 31041

Your FirstScope 114 includes: optical tube w/ tube

rings attached; tripod with center support bracket;

equatorial mount; two eyepieces; StarPointer

finderscope; 5 lb. counterweight; counterweight bar;

two slow motion cables; eyepiece accessory tray;

documentation including an owner's manual, The

Sky™ CD Software.

All three legs should be the same length to

provide a level platform for the telescope.

Locate the equatorial mount and place the

base of the mount through the hole in the

center of the tripod mounting platform.

Item #31132

Celestron Technical Support: 310

To set up the tripod, spread the legs outward

until they are fully extended. Extend the center

portion of each of the three tripod legs down 6-

8".

Place the accessory tray on top of tripod's

center leg brace. Thread the tray's post into the

threaded hole in the center of the leg brace.

From underneath the tripod mounting platform,

thread the mounting bolt with washer into the

threaded hole on the bottom of the equatorial

mount.

Questions or Problems with Set-up?

CONTACT:

Quick Set-up Guide

Use the three tightening screws located at the

bottom of each leg to secure the extended legs

in place.

Properly assembled, the accessory tray should

appear as pictured above.

Latitude

Screw #2

Thread the latitude adjustment screws into the

equatorial mount until both screws are

touching the inside of the mount and the

mount can no longer pivot up and down.

803

5955