Gree AEH09AA-D3DNA1C/I Manuel d'installation et d'utilisation - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Gree AEH09AA-D3DNA1C/I. Gree AEH09AA-D3DNA1C/I 15 pages.

Imprimer la page

Maintenance

Before inspection and maintenance of the unit. PLEASE set power switch to "OFF" to cut off the

power supply.

Units

3.1

●

Indoor unit, Outdoor unit and Remote controller

1. Wipe them with dry soft cloth.

● Front panel

Open the front panel.

Slide the two stoppers on the left and right sides inward until they click.

2. Remove the front panel.

• Remove the string.

• Allowing the front panel to fall forward will enable you to remove it.

3. Clean the front panel.

• Wipe it with a soft cloth soaked in water.

• Only neutral detergent may be used.

• In case of washing the front panel with water,dry it with cloth, dry

it up in the shade after washing.

4. Attach the front panel.

• Insert the front panel into the grooves of the unit (3 places).

• Attach the string to the right, inner-side of the front grille.

• Close the panel slowly.

CAUTION

• Don't touch the metal parts of the indoor unit. If you touch those parts, this may cause an injury

• When removing or attaching the front panel, use a robust and stable stool and watch your steps carefully

• When removing or attaching the front panel, support the panel securely with hand to prevent it from falling.

• For cleaning, do not use hot water above 40°C, benzine, gasoline, thinner, nor other volatile oils, polishing compound,

scrubbing brushes, nor other hand stuff.

•

After cleaning, make sure that the front panel is securely fixed.

Filters

3.2

Open the front panel.

2. Remove the air filter.

• Press the claws on the right and left of the air filter down slightly, then

pull upward.

3. Take off the Titanium Apatite Photocatalytic Air-Purifying

Filter.

• Hold the tabs of the frame, and remove the claws in 4 places.

Place front

panel in

grooves.

OPERATION INSTRUCTIONS

String