Gainsborough K143 Manuel rapide - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel rapide pour {nom_de_la_catégorie} Gainsborough K143. Gainsborough K143 3 pages. Solar bird feeder stake

Imprimer la page

Solar Bird Feeder Stake

Please read and retain these instructions for future reference

Before using first time

Remove the protective film from the solar panel.

CHARGING AND OPERATION:

There is an "on/off" switch at the back of the solar panel case. Twist the lamp shade and find the

switch then push the switch to "on" position. Then replace the cover and position the light in a

sunny location. Charge the solar product by placing it under direct sunlight for at least 8 hours.

The light will work automatically. It will charge under direct sunlight during the daytime and

illuminate at night.

Leave the switch to "ON" position.

NOTE: In order to test the lights simply cover the solar panel with your hand and the light should turn on

automatically.

Find an ideal Place for the Solar Light.

Place the solar light in an area where it will receive direct sunlight for at least 8 hours per day. The number of

hours the light will illuminate is directly proportional to the hours of sunlight it receives. If the light is placed

in a shaded area, it will not be able to fully charge and its illumination time will be limited. Do not place the

light near other outdoor lighting like porch or streetlights. These may fool the sensor and keep the light from

coming on, or cause it to turn off automatically

To easily insert stakes into the ground, it is recommended to wet the ground first. To avoid damaging garden

stakes when inserting into the ground, select a spot in soft, rock-free soil. Insert the base of the stake first

then gently insert the rest of the stake into the base. DO NOT push directly against the solar cell or the

ornament housing containing the actual LED light.

K143

Instructions for Use

v001: 23/08/21