Gainsborough 11453 Mode d'emploi - Page 2
Parcourez en ligne ou téléchargez le pdf Mode d'emploi pour {nom_de_la_catégorie} Gainsborough 11453. Gainsborough 11453 3 pages. 2 tier barrel fountain
Imprimer la page2 Tier Barrel Fountain
Please read and retain these instructions for future reference
Parts
Assembly instructions
1. Turn the small barrel (5) upside down using the screws (2) and attach and secure the large panel (4).
2. Connect the tubing to the water pump (8) and place in the bottom of the large barrel (6).
3. Place the small barrel with the large panel attached on the top of the large barrel (6). Make sure that the
electrical cable is fed out the back and the pipe (7) is fed upwards through the barrels. Secure the barrel
in place with screws (2).
4. Screw the pump handle (1) to the base.
5. Place the small panel (3) on the top of the water feature, making sure the tubing is fed upwards through
the hole. Secure in place using the screws (2).
6. Connect the tubing (7) to the water pump and screw the water pump into position.
7. Fill the large barrel with water. The water feature is now ready to be plugged into a power source.
Installation
Immerse pump completely in the water with the pump's nozzle above the water level. Ensure the pump
is fixed firmly on the bottom of the fountain to avoid vibration.
Plug the jack of pump in the jack of solar panel output.
Expose the solar panel to sufficient sunlight, ideally facing the sun directly.
Instructions for Use
11453
v002: 27/11/19