DB Drive EUPHORIA XPERT EX5K Manuel de l'utilisateur - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} DB Drive EUPHORIA XPERT EX5K. DB Drive EUPHORIA XPERT EX5K 7 pages. Full range class d monoblock
Imprimer la page
GND ( GROUND CONNECTION )
Locate a secure grounding connection as close to EUPHORIA XPERT series as possible. Make sure the location is
clean and provides a direct electrical connection to the frame of the vehicle.
Connect one end of a short piece of the same gauge cable as the power cable to the grounding point.
Run the one end of the cable to the grounding point. Run the other end of the cable to the mounting location.
Connect the ground cable to the screw terminal labeled as GND.
REM ( REMOTE CONNECTION )
Run a remote turn on cable from the headunit's remote swithed +12V output.
EUPHORIA XPERT AMPLIFIER +12V, GROUND, REMOTE CONNECTION DIAGRAM
Remote turn on
Ground
3-4. SPEAKER CONNECTION
DB Drive recommends to use minimum 12 gauge speaker connect ing cables. Run 12 gauge speaker
connecting cables from your speakers to EUPHORIA XPERT amplifier's mounting location.
Keep speaker cables away from the power cables and EUPHORIA XPERT amplifier's input cables. Use grommets
anywhere the cables have to pass through the hoes in the metal frame or sheet metal. Connect to the speakers
according to the type of terminals on each speaker. Strip 3/8" of insulation from the end of each cable and
twist the cables strands together tightly. Make sure the re are no stray strands that might touch other cables
or terminals and cause a short circuit.
Crimp spade lugs over the cable ends or tin the ends with solder to provide a secure termination.
Connect the cable ends to EUPHORIA XPERT amplifiers as speaker system diagram.
TM
12V
BATTERY
TM
03
Ground