8BITDO P30 Manuel d'instruction

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} 8BITDO P30. 8BITDO P30 3 pages. Wireless gamepad

PC Engine Mini，PC Engine CoreGrafx Mini & TurboGrafx 16 Mini

1. Plug the receiver to your chosen device, blue LED blinks once per cycle.

2. Press HOME button on the controller to pair.

Blue LEDs on both the controller and receiver become solid when connection is successful.

3 .

Switch

1. Plug the receiver to your Switch, blue LED blinks 4 times per cycle.

2. Press HOME button on the controller to pair.

3. Blue LEDs on both the controller and receiver become solid when connection is successful.

* Switch system needs to be 3.0.0 or above. Go to System Setting > Controller and Sensors > turn on Pro

Controller Wired Communication

Battery

Status

Low battery mode

Battery charging

Battery charged

·Built-in 180 mAh Li-on with 18 hours of play time.

·Rechargeable via USB cable with 1 – 2 hour charging time.

·Controller turns off in 1 minute with no connection and 15 minutes with connection but no

use

Retrieve a lost connection or connect to a new receiver

1. Turn on the controller then press and hold SELECT button for 3 seconds. Blue LED starts

to rapidly blink.

8BitDo P30 2.4G Wireless Gamepad

Instruction Manual

LED Indicator

Red LED blinks

Red LED stays solid

LED turns off