Celestron StarSense Explorer DX 102AZ Manuel d'installation rapide - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} Celestron StarSense Explorer DX 102AZ. Celestron StarSense Explorer DX 102AZ 4 pages.
Imprimer la page
11
Slide the finderscope bracket into the dovetail slot
on the telescope tube near the focuser. The large
window on the finder should be facing the front
of the telescope. Secure the bracket by tightening
the setscrew on the dovetail slot.
14
Line up the arrow on the dock with the alignment
mark on the mount and press inward while turning
the dock counterclockwise until the orange release
button snaps into place in the hole on the dock.
Downloading and
Activating the App
Before you take your telescope outside, download
the StarSense Explorer app to your mobile device.
Search for "Celestron StarSense Explorer" in the
Apple App Store or Google Play. The app is large,
so we recommend downloading it while connected
to Wi-Fi.
2 | ENGLISH
12
There is a small clear plastic tab inserted between the
battery and the contact. This was included to prevent
the battery from discharging during shipment. Pull
this out to allow your battery to work.
1 5
To remove the dock, press the orange release button
and turn the dock clockwise until the bayonet mount
releases.
1
Download the app from the
or
before your first observing session
.
When prompted, enter the unique unlock code below to
enable telescope control on your device.
Once you have downloaded the app, locate the
orange postcard in your telescope box. Launch the
app. When prompted, enter the activation code on
the postcard to activate the app. Your code will
unlock up to 5 devices.
13
To install the StarSense phone dock, insert the
bayonet mount on the side of the dock into the
port on the side of the mount opposite the dovetail
clamp.
1 6
Remove the lens cap from the front of the
telescope. To observe, look through the eyepiece
as shown above. Focus the image by turning the
knobs below the focuser.