Automationdirect.com Productivity 2000 P2-04AD Manuel - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Automationdirect.com Productivity 2000 P2-04AD. Automationdirect.com Productivity 2000 P2-04AD 8 pages. Analog input
Imprimer la page
General Specifications
Operating Temperature
0º to 60ºC (32º to 140ºF)
Storage Temperature
-20º to 70ºC (-4º to 158ºF)
Humidity
5 to 95% (non-condensing)
Environmental Air
No corrosive gases permitted
Vibration
IEC60068-2-6 (Test Fc)
Shock
IEC60068-2-27 (Test Ea)
Field to Logic Side Isolation
1800VAC applied for 1 second
Insulation Resistance
> 10MΩ @ 500VDC
Heat Dissipation
1.4 W
Enclosure Type
Open Equipment
UL508 File E139594, Canada & USA
Agency Approvals
CE (EN61131-2*)
Module Keying to Backplane
Electronic
Module Location
Any I/O slot in a Productivity2000 System
Use ZIPLink Wiring System or removable terminal block
Field Wiring
(not included). See "Wiring Options" on page 5.
See the "EU Directive" topic in the Productivity Suite
EU Directive
Help File. Information can also be obtained at:
www.productivity2000.com
Connector Type (not included) 18-position removable terminal block
Weight
90g (3.2 oz)
*Meets EMC and Safety requirements. See the D.O.C. for details.
2
www.productivity2000.com
Input Specifications
Input Channels
4
Module Signal Input Ranges
±10 VDC, ±5 VDC, 0-5 VDC, 0-10 VDC, 0-20 mA
Signal Resolution
16-bit
1 LSB = 1 count
±10 V = 305μV
Resolution Value of LSB
±5 V = 152μV
(least significant bit)
0-5 V = 76μV
0-10 V = 152μV
0-20 mA = 0.305μA
0-65535 counts unipolar
Data Range
-32768 to +32767 counts bipolar
±31 mA, current input
Maximum Continuous Overload
±100 V, voltage input
1MΩ±10% voltage input
Input Impedance
250Ω±0.1% 1/4 W current input
Hardware Filter Characteristics
Low Pass 1st order, -3dB @ 48Hz
2ms per channel
Sample Duration Time
(does not include ladder scan time)
All Channel Update Rate
8ms
Open Circuit Detection Time
Zero reading within 1s (current input only)
Conversion Method
Successive approximation
Accuracy vs. Temperature
±10PPM / ºC maximum
0.1% of range voltage, 0.2% of range current
Maximum Inaccuracy
(including temperature drift)
±0.01% of range max., ±10 V & ±5 V
Linearity Error (end to end)
±0.015% of range max., 0-10 V, 0-5 V & 0-20 mA
Monotonic with no missing codes
Input Stability and Repeatability
±0.035% of range (after 10 min. warmup)
Full Scale Calibration Error
±0.2% of range maximum
Offset Calibration Error
±0.065% of range maximum
Max Crosstalk
-96dB, 1 LSB
Edison S500-32-R, 0.032A fuse
Recommended Fuse (external)
on current inputs only
External DC Power Required
24VDC (-20% / +25%) 35mA
Tech Support 770-844-4200