Automationdirect.com Productivity 2000 P2-08NE3 Manuel - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Automationdirect.com Productivity 2000 P2-08NE3. Automationdirect.com Productivity 2000 P2-08NE3 4 pages. Ac/dc input
Module Installation
WARNING:
Do not apply field power until
the following steps are completed. See
hot-swapping procedure for
exceptions.
Step One:
Align module
catch with base slot and
rotate module into
connector.
Step Two:
Pull top locking tab
toward module face. Click indi-
cates lock is
engaged.
Step Three:
Attach field wiring using the removable
terminal block or ZIPLink wiring
system.
2
www.productivity2000.com
2
rotate
to seated
position
1
Align
with slot
Locked
Unlocked
Wiring Options
1
ZIPLink Connection System
Cable + ZIPLink Module = Complete System
ZIPLink pre-wired
terminal block cables
ZIPLink Modules
2
Terminal Block with pigtail cable
3
Screw Terminal Block only
4
Spring Clamp Terminal Block only
Tech Support 770-844-4200
0.5m (1.6FT) cable
ZL-P2-CBL18
1.0m (3.3FT) cable
ZL-P2-CBL18-1
2.0m (6.6FT) cable
ZL-P2-CBL18-2
ZL-RTB20
Feed through
ZL-P2-CBL18-1P
1.0m (3.3FT) cable
ZL-P2-CBL18-2P
2.0m (6.6FT) cable
P2-RTB
(Quantity 1)
P2-RTB-1
(Quantity 1)