Celestron 44316 Manuel d'instruction - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Celestron 44316. Celestron 44316 13 pages. Handeld digital microscope
Également pour Celestron 44316 : Manuel de démarrage rapide (2 pages)

Imprimer la page

3. USING YOUR MICROSCOPE

A. CONNECT TO A MONITOR OR

PROJECTOR

Connect the included HDMI cable to the microscope and to an

open HDMI port on the monitor or projector.

Plug the USB cable into the microscope and then into an open

USB 2.0 port on your monitor or projector (if available).

If there is no USB 2.0 port on the monitor or projector, use any

5V-1A USB plug and plug the USB cable into it, and then into an

available power outlet.

NOTE: The included USB cable works with all standard USB plugs

that come with many of today's electronics such as

smartphones and tablets.

NOTE: An additional option for power is an external power source

such as a power bank that has a standard USB OUT port. All

Celestron Elements hand warmers and power banks will work

for this purpose. You can find them here:

www.celestronelements.com

Power up the microscope by pressing the ON/OFF button (5).

B. TAKE A STILL IMAGE

Insert your Micro-SD card in the Micro SD card slot (3) on

the MicroDirect body.

NOTE: Micro SD Card NOT included.

NOTE: SD Card slot supports up to 32G SDHC.

Press the Shutter Trigger button (8) and the captured image

will be saved in the Micro-SD card.

Loosen the Lock Wheel (15) adjust the course focus by

rotating the Course Focus wheel (16).

Tighten the Lock wheel (15) to hold the assembly in place.

Turn the Fine Focus wheel (11) to focus on the specimen.

ENGLISH