Automationdirect.com Productivity 2000 P2-16TR Manuel - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Automationdirect.com Productivity 2000 P2-16TR. Automationdirect.com Productivity 2000 P2-16TR 4 pages. Relay output
Imprimer la page
WARNING:
To minimize the risk of potential safety problems, you should follow all appli-
cable local and national codes that regulate the installation and operation of your equip-
ment. These codes vary from area to area and it is your responsibility to determine which
codes should be followed, and to verify that the equipment, installation, and operation are
in compliance with the latest revision of these codes.
Equipment damage or serious injury to personnel can result from the failure
to follow all applicable codes and standards. We do not guarantee the products
described in this publication are suitable for your particular application, nor do we
assume any responsibility for your product design, installation, or operation.
If you have any questions concerning the installation or operation of this equipment,
or if you need additional information, please call Technical Support at 770-844-4200.
This publication is based on information that was available at the time it was print-
ed. At AutomationDirect.com® we constantly strive to improve our products and services,
so we reserve the right to make changes to the products and/or publications at any time
without notice and without any obligation. This publication may also discuss features that
may not be available in certain revisions of the product.
Typical Relay Life
Voltage & Type of Load
30VDC Resistive
30VDC Solenoid
120VAC Resistive
120VAC Solenoid
240VAC Resistive
240VAC Solenoid
Removable Terminal Block Specifications
Part Number
P2-RTB
Number of
18 Screw Terminals
Positions
30-16 AWG (0.051 - 1.31 mm²)
Solid / Stranded Conductor
Wire Range
3/64 in. (1.2 mm) Insulation Maximum
1/4 in. (6-7 mm) Strip Length
Conductors
"USE COPPER CONDUCTORS, 75°C" or Equivalent.
Screw Driver
Width
Screw Size
M2
Screw Torque
2.5 lb·in (0.28 N·m)
4
www.productivity2000.com
Operations at 1A Load Current
100,000
100,000
100,000
100,000
100,000
100,000
P2-RTB-1
18 Spring Clamp Terminals
28-16 AWG (0.081 - 1.31 mm²)
Solid / Stranded Conductor
3/64 in. (1.2 mm) Insulation Maximum
19/64 in. (7-8 mm) Strip Length
1/8 inch (3.8 mm) Maximum
N/A
N/A
General Specifications
Operating Temperature
0° to 60°C (32° to 140°F)
Storage Temperature
-20° to 70°C (-4° to 158°F)
Humidity
5 to 95% (non-condensing)
Environmental Air
No corrosive gases permitted
Vibration
IEC60068-2-6 (Test Fc)
Shock
IEC60068-2-27 (Test Ea)
Field to Logic Side Isolation
1800VAC applied for 1 second
Insulation Resistance
>10MΩ @ 500VDC
Heat Dissipation
2.73W
Enclosure Type
Open Equipment
UL508 file E139594, Canada & USA
Agency Approvals
CE (EN61131-2*)
Module Keying to Backplane
Electronic
Module Location
Any I/O slot in a Productivity2000 System.
Use ZIPLink Wiring System or removable terminal
Field Wiring
block (not included). See "Wiring Options" on
page 3.
See the "EU Directive" topic in the
EU Directive
Productivity2000 Help File. Information can also be
obtained at: www.productivity2000.com
Connector Type (not included) 18 position removable terminal block
Weight
188g (6.64oz)
*Meets EMC and Safety requirements. See the D.O.C. for details.
Tech Support 770-844-4200