HIDRIA 0314-4-0166 Manuel d'utilisation - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} HIDRIA 0314-4-0166. HIDRIA 0314-4-0166 9 pages. Fan with electronically commutated external-rotor motor

Imprimer la page

1. Installation and Connection

USER'S GUIDE R14 AXIAL FAN , Code: 0000, Iss: 21.09.2021

INSTALLATION AND CONNECTION

Mechanical installation:

This unit should only be installed by a qualified technician. Inspect the motor bearings for proper operation prior to installation.

Do not install the fan on an unstable surface. First install the device on the application, than connect the protective earth!

The method of fixing stated is not to depend on the use of adhesives since they are not considered to be a reliable fixing means.

The fan is primarily constructed for installation with rotor on bottom or with shaft in horizontal. For other possibilities please contact for manufacturer's

support.

Ensure that the air-gap between the fan impeller and the stationary housing is constant. Distortion due to an uneven surface of basis may lead to a fan

failure. Air-gap between blade and cone-inlet (housing) should be of min. 3 mm.

Fan must be fixed to stationary housing 4x M8 at 90° on diameter 750mm as indicated on enclosed technical drawing. Use screws with property class

of 8.8. Secure all threaded joints with e.g. Loctite or by using self-locking screws.

The system manufacturer or the machine builder is responsible that the inherent installation and security information are harmonized with the valid

standards and guidelines (ex. EN 13857). To prevent dangerous situation and possible injuries the height and the diameter of inlet cone must be

appropriate dimensions.

5 / 9