Dynamic CCTV DVR-8 Manuel de l'utilisateur - Page 17

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Dynamic CCTV DVR-8. Dynamic CCTV DVR-8 18 pages. 8 channel digital video multiplex recorder

Imprimer la page

8 channel stand-alone DVMR

ALL ABOUT IMAGE RECOGNITION & PROCESSING

3. DISPLAY SETUP

1) Edit camera title

Camera tile is 9 characters in length and includes

alphabet in a capital letter or small letter, numbers,

and some special letters.

Default camera title is CAM 1, CAM 2, and so on for

channel 1, channel 2 and so on.

Moving to a channel you want to change is done by

pressing [UP] and [DOWN] button, moving next

character in a specific camera tile is done by pressing

[ENTER] button.

On the right side of display, there is series of letters in

vertical, and letter just behind triangular cursor is

written whenever you press [LEFT] or [RIGHT] button.

To save and exit EDIT CAMERA TITLE mode, press

[MENU] button.

2) Adjust colors

You can change parameter of camera color like

brightness, contrast, and others for each channel.

First select channel number whose parameters you

want to change, using [LEFT] and [RIGHT] button.

When you select channel, image from selected

channel is displayed. Then select element you want to

change by pressing [UP] and [DOWN] button and

adjust by pressing [LEFT] and [RIGHT] button. You

can see how it looks like whenever you change

values.

After you adjust parameters for channel you selected,

then select next channel for change.

To save and exit ADJUST COLOR mode, press

[MENU] button.

3) Motion setup

In motion setup mode, you can set motion detection

area, sensitivity of motion, and detect

windowrespectively, channel by channel.

It is very important to set motion detection area,

sensitivity, and detect window, when you are going to

record just when motion is detected.

Motion detection area is important because DVMR

system just recognize motion in this area.

Sensitivity of motion specifies the sensitivity with

which DVMR system detect motion, and very slow

movement may not be detected if sensitivity of motion

is set at very low level.

Detection windows specifies size of moving object,

and DVMR system does not detect moving object

which is smaller in numbers of cell than detection

windows fixed in advance.

3. Operation

EDIT CAMERA TITLE

CAM 1..... [ CH-01 ]

(

CAM 1..... [ CH-01 ]

)

CAM 1..... [ CH-01 ]

CAM

Char

Pos Enter

EDIT CAMERA TITLE

ADJUST COLOR

CH NUMBER

BRIGHTNESS

-1

CONTRAST

SATURATION

HUE

-1

GAIN

-3

SELECT

PRESS

ADJUST COLOR

Cell(16x12) in green color indicates detection area, and color

change to violet color in cells represents motion is detected

CELL

CAM 01

X08Y07

SELECT : MENU

EDIT : ENTER/

MOTION SETUP

8 channel stand-alone DVMR

ALL ABOUT IMAGE RECOGNITION & PROCESSING

3-3. Playback

1. Playback setup

1) Press [PLAY] button to enter into playback mode.

2) [PLAY] button is is pressed shortly, it just start playback

from the previous stop point.

3) If you press [PLAY] button for longer time, you can enter

into GO TO MENU, and set the point from which you want to

start playback. You can set starting point of playback by

setting PERCENT, TIME/DATE, or EVENT LIST in GO TO

MENU.

4) Display screen will appear as shown on the right picture.

2. How to set in GO TO MENU

1) First select any one of PERCENT, TIME/DATE, and EVENT LIST using [UP] and [DOWN] buttons.

If you select PERCENT, you are supposed to set starting point of playback by percent.

If you select TIME/DATE, you are supposed to set starting point of playback by time and date.

If you select EVENT LIST, you will enter into event list and select one of event list to start playback from

selected event.

2) PERCENT

Press [ENTER] button when triangular cursor is in front of PERCENT to select target by percent.

In [PERCENT GO TO] menu, start and end point of recording shall be displayed. At the same time,

how many % of total HDD(1 or 2 units in DVMR unit) space is recorded is displayed. Under this line, you

are requested to set starting point of playback by % using [LEFT] and [RIGHT] button and [UP] and

[DOWN] button.

After you set starting point by %, press [ENTER] button shortly, and Target(starting point) is display in

time/date and at the same time playback starts from the point you set, while all message is displayed. If it

is the right point you want to start playback, then press [PLAY] button for longer time again to make

messages disappear.

To stop playback and go back to recording mode, press [PLAY] button shortly again.

3) TIME/DATE

Press [ENTER] button when triangular cursor is in front of TIME/DATE to select target by time/date.

In [TIME/DATE GO TO] menu, start and end point of recording shall be displayed.

Under this line, you are requested to set starting point of playback by time and date. Using [LEFT]

and [RIGHT] button and [UP] and [DOWN] button, set time and date from which you want to start

playback. Then press [PLAY] button shortly, and it starts to playback from the point you set, however

all messages are still displayed. If it is the right point from which you want to start playback, press [ENTER]

button for longer time once more, and messages shall be disappeared..

4) EVENT LIST

Press [ENTER] button when triangular cursor is in front of EVENT LIST to select target by event list.

In [EVENT-LIST GO TO] menu, list of event shall be displayed.

Just select event from which you want to start playback using [DOWN] and [UP] buttons, and then

press [PLAY] button shortly to start playback. If it is the right point from which you want to start playback,

press [ENTER] button once more to make all messages disappeared.

3. Operation

CH-01

CH-02

CH-03

[ GO TO MENU ]

PERCENT

TIME/DATE

CH-04

EVENT LIST

CH-05

CH-06

03 / 10 / 25

16 : 11 : 38

TIM

12.34%

CH-07

CH-08

5.03%

GO TO MENU