ActivePure A1040F Manuel - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} ActivePure A1040F. ActivePure A1040F 14 pages.
Également pour ActivePure A1040F : Manuel (16 pages)
Imprimer la pageMAINTENANCE REMINDERS
When maintenance is required, the Display Screen will brighten and flash and the Maintenance Reminder will appear.
WARNING:
• Unplug the unit before performing any maintenance procedures
• This appliance can be used by children aged from 8 years and above and persons with reduced physical,
PERFORM CLEANING
• The perform cleaning CLEAN indicator will come on approximately every 30 days
•
Clean the Filter Assembly (see page 8)
• Vacuum the ActivePure
®
• Vacuum Top and Rear Grill openings
NOTE:
Be sure to press the Reminder Reset icon to clear the reminder following regular maintenance (see below).
When the CLEAN indicator starts flashing, it reminds you need to clean the filter.
Follow the steps below to remove the filter and clean it. While powered on, hold the Reset button, approximately three seconds, until you
hear a beep sound alerting you that it has been cleared.
1. Unplug unit.
WARNING:
Do not operate the ActivePure
properly installed.
REPLACE ACTIVEPURE
The CELL indicator will light up if the ActivePure Cell is no longer working. To order a new ActivePure Cell, contact your sales representative
or contact our Customer Service line at 800.572.1446.
NOTE:
The ActivePure® Cell should be replaced every one (1) year, even if the unit does not display this message.
When the CELL indicator starts flashing, you will need to perform the following operations to reset:
• After 1 year of cumulative use, the CELL indicator starts flashing. After the user replaces the new ActivePure
operation steps on page 11 of the manual, hold the RESET icon until you hear a beep, approximately three minutes.
When the CELL indicator starts flashing in red, you will need to perform the following operations to reset:
• The CELL indicator flashes in red to remind the user that ActivePure
reinstall ActivePure
Cell and check whether the socket is installed properly. After the installation is successful, there is no need to press
®
the RESET icon, the red light will automatically turn off. After the above operations, if the indicator remains flashing in red, ActivePure
Cell is possibly damaged. In this case, contact Customer Service at 800.572.1446.
RESETTING THE REMINDERS
The reminders you need to reset are the PERFORM CLEANING and REPLACE ACTIVEPURE
press and hold the Reset icon for approximately 3 seconds and the screen will stop flashing and you will hear a beep to let you know the
reminder has been cleared, please see above instructions for each indicator.
sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand the hazards involved; children shall
not play with the appliance; cleaning and user maintenance shall not be made by children without supervision
Cells
2. Press the top of the back
cover to release the back
panel.
®
CELL
®
3. Lift up to remove the
4. Use the included
back panel.
screwdriver to
unscrew the filter.
Surface & Air Guardian without the Filter Assembly and Back Cover
Cell is not properly installed. After disconnecting the power supply,
®
5. Lift the Filter Assembly
up and out to remove.
Cell according to the
®
CELL indicators. After performing maintenance,
®
Hand Strap
®
7