AutoMotionShade 216P Manuel de référence rapide - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de référence rapide pour {nom_de_la_catégorie} AutoMotionShade 216P. AutoMotionShade 216P 2 pages.

Pairing 216P with 2

1. Connect the output plug of the External Receiver Module to Motor, and input plug to the wires coming from the

optional wired dash switch that controls the shade. The red wire connects to ignition wire of vehicle.

2. Ensure the Module is connected to a 12V DC power supply (white wire to ground, black wire to 12V power). A green

light on the Module should now be lit.

3. On the remote, first choose the channel you want to program by pressing the button of that channel.

4. On the External Receiver Module, press and hold the pushbutton until the color of the light inside changes to red,

then release it and within 2 seconds, press and hold the pair button on the back of remote for few seconds (until SET

appears on display if your remote has a display), then release it and immediately press the stop button on front of

remote.

Note 1- To clear or unpair a channel on the remote, press and hold the pair button on back of remote for few seconds

(until SET appears on display if your remote has a display), then press "down" button on front of remote.

Note 2- To reverse direction, press and hold the pair button on back of remote for few seconds (until SET appears on

display if your remote has a display), then press "up" button on front of remote.

414: R-1:09/18

generation remotes

To dash switch

To 12V Power

Effective Date: Sep 19, 2018