CELETTE DUO SPOT Manuel original - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel original pour {nom_de_la_catégorie} CELETTE DUO SPOT. CELETTE DUO SPOT 20 pages.

3.6 WELDING MODE, TORCH AND EARTH CABLE CHOICE

There are 3 welding mode for the machine

1. STEEL WASHER WELDING:

Use quick puller slide hammer, h type puller for the steel car body, please mount Euro and Japanese type

torch to socket "1"and control socket "4", mount earth cable to socket "2". Select "torch" for switch "5".

2. ALUMINIUM STUD WELDING:

Please mount stud welding torch to socket "1" and control socket "4", mount earth cable to socket "2".

If use complete set stud welding torch with earth cable , it is also the same. Please mount earth cable to

socket "2" .Select "torch" for switch "5".

3. BRASS ELECTRODE / CARBON ELECTRODE HEATING:

Please mount Euro and Japanese type torch to socket "1" and control socket "4" , mount earth cable

to socket "2". Select "carbon electrode heating" for switch "5". If use brass electrode heating function,

please mount brass electrode(round or iron electrode) on the torch. If use carbon electrode heating

function, please mount carbon electrode on the torch.

The cable connection, please refer to above the diagram.

Carbon electrode heating (optional function, only for carbon heating type machine).

www.celette.com

CONTROL CABLE

SPOT WELDING TORCH CABLE

EARTH CABLES

SPOT WELDING TORCH.

USE ONE EARTH CABLE

OR TWO EARTH CABLE

SPOT WELDING

TORCH

WORK PIECE

Page No: 10