DBI SALA Saflok Manuel d'instruction de l'utilisateur - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction de l'utilisateur pour {nom_de_la_catégorie} DBI SALA Saflok. DBI SALA Saflok 14 pages. Pole anchor system

Imprimer la page

6.0 MAINTENANCE, STORAGE, AND TRANSPORT

6.1

MAINTENANCE: Clean the Rope Grab, Shock Absorber, Chain Tensioner and Vertical Lifeline Rope with

water and a mild soap solution. Wipe off hardware with a clean, dry cloth, and hang to air dry. Do not force

dry with heat. An excessive buildup of dirt, paint, etc. may prevent components of the Pole Anchor System

from working properly, and in severe cases degrade components to a point where they have weakened and

should be removed from service. If you have any questions concerning the condition of any component of

the Pole Anchor System, or have any doubt about putting them into service, contact Capital Safety.

6.2

STORAGE: When not in use, store the Saﬂ ok Pole Anchor System in a cool, dry, clean environment; out

of direct sunlight. Avoid areas where chemical vapors exist. After extended storage, thoroughly inspect all

components per the guidelines in Section 5.2.

6.3

TRANSPORT: Transport the Saﬂ ok Pole Anchor System in the provided Carrying Bag.

7.0 SPECIFICATIONS

7.1

STANDARDS: When installed and used per the requirements and recommendations in this manual, the

Saﬂ ok Pole Anchor System meets standards and requirements deﬁ ned in Section 1.2.

7.2

SYSTEM:

CAPACITY:

WEIGHT:

VERTICAL LIFELINE ROPE:

ANCHOR TUBE:

CARABINER(S):

INSTALLATION/REMOVAL TOOL:

ROPE GRAB & SHOCK ABSORBER:

CHAIN TENSIONER:

◊

One User - 310 lbs (140 kg)

◊

Model 2104800 - 12 lbs (5.4 kg)

◊

Model 2104801 - 20 lbs (9.07 kg)

◊

5/8" (126 mm) x 80' (24.3 m) Oletec-12-2 ply orange, 100% Polyoleﬁ n

Lifeline, High Dielectric meets ASTM F1701-05

◊

2-1/2" (3.5 mm) I.D. Locked Soft Eye Splice with Plastic Thimble

◊

CPVC 4120 1" (25.4 mm) SCH 40 ASTM F 441, Grey

◊

Heat Treated, Zinc Plated Steel

◊

Locking Type: Double-Action Self Closing/Self Locking Gate Face/Side &

Minor Axis: 3,600 Lbs. (1633 Kg)

◊

Minimum Proof Load: 3,600 lbs (1633 kg)

◊

Tensile Strength: 5,000 lbs, (2268 kg)

◊

Aluminum, Alloy Tool 206-T4

◊

Finish: Sulfuric Anodize Clear per Mil-A-8625, Type 2, Class 1

◊

Riveted and Welded with Hinged Rope Channel

◊

Material Type: Body, Hinge, Cam and Attachment Eye – High Impact

Resistant Steel, Zinc Plated

◊

Lifeline Diameter: 5/8" (16 mm)

◊

Integrated

◊

Parking Feature: Allows manual operation as required>

◊

Anti-Panic Feature: Stops falls even when Locking Cam is open.

◊

Zinc Plate per ASTM, TYPE II, CLASS Fe/Zn 12, Yellow