DBI SALA Uni 8 Overhead Manuel d'instruction de l'utilisateur - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction de l'utilisateur pour {nom_de_la_catégorie} DBI SALA Uni 8 Overhead. DBI SALA Uni 8 Overhead 16 pages.
Imprimer la page
Uni 8™ Overhead Horizontal Lifeline System
The Uni 8™ Overhead Horizontal Lifeline
Section 2.0
The Uni 8™ Overhead Lifeline System is a unique safety product. It offers both fall arrest and restraint capabilities using a 1 x 19 8mm
(5/16") stainless steel cable, which is secured to a structure using a range of anchorage fittings. The two wheeled attachment carriages
are secured to the system during installation and when in use move over the intermediate brackets without interruption. It is a true hands-
free system.
The system has a minimum breaking strength of 38 kN (8550lbs) and can span up to 30 metres (98.42ft) between intermediate supports.
This is achieved through high pre-tension loading in the cable of 5kN combined with the properties of the 1 x 19 8mm (0.31") cable.
A complete range of structural end anchors are available to enable the system to integrate with the structure.
The Uni 8™ Overhead Horizontal Lifeline is designed to provide a facility to enable safe working at heights in accordance with current
regulations and safe access to a variety of otherwise dangerous situations, or to restrain personnel from putting themselves at risk.
The Uni 8™ Overhead System consists of a horizontally mounted lifeline that spans the work area and is fixed at either end to the structure
via anchorage connectors. The lifeline may be supported at regular intervals by intermediate brackets. The intermediate brackets help to
reduce the loads in the event of a fall, limit cable deflections and allow for longer single installations. The Uni 8™ Overhead System is only
suitable for mounting 1.6m or more above the work area or walking surface and does not navigate corners or changes in direction. In order
to ensure best performance of the system, it should be installed so that it is completely level.
Owing to the nature of the product it is imperative that it is installed in accordance with section 1.0, paragraph 2 of this manual.
The Uni 8™ Overhead System is a horizontal lifeline fall protection system.
It complies with European Standard EN795:1996, AS/NZS 1891.2 and OSHA 1926.502.
WORK RESTRAINT
A Restraint System is designed to prevent a user
accessing risk areas (such as roof edges), thereby
preventing a fall.
Issue Date: 18/04/13
1
FALL ARREST
A Fall Arrest System allows access to a fall hazard
and is designed to safely arrest the operative in
the event of a fall.
Issue No: 5
2
4