DBI SALA 2100180 Manuel d'instruction de l'utilisateur

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction de l'utilisateur pour {nom_de_la_catégorie} DBI SALA 2100180. DBI SALA 2100180 9 pages. Roof top counterweight anchor system

Imprimer la page

The Ultimate in Fall Protection

Figure 1 - Assembled Roof Top Counterweight Anchor System with Lifting Kit

Important:

be used when assembling and using the Roof

Top Counterweight Anchor System 2100180

(CE model) or 2100185 (ANSI/CSA model) in

combination with Lifting Kit 2104190. Do not

use instruction 5903602 or 5903726 which are

intended for assembling and using the Roof

Top Counterweight Anchor system 2100180 or

2100185 without Lifting Kit 2104190.

If you intend to add the Lifting Kit 2104190 to

an already-assembled Roof Top Counterweight

Anchor System 2100180 or 2100185, the Roof

Top Counterweight Anchor System must be

completely disassembled and then reassembled

by following this instruction 5903698.

1 - Roof Top Anchor 2 - ID Label 3 - U-Bolts (4)

WARNING:

These instructions must be provided to the user of this equipment. The user must read and understand these instructions

before using this equipment. Manufacturer's instructions must be followed for proper use and maintenance of this equipment. The user

must follow the manufacturer's instructions for each component of the system. Alterations or misuse of this product or failure to follow

instructions may result in serious injury or death.

IMPORTANT:

If you have questions on the use, care, or suitability of this equipment for your application, contact Capital Safety.

IMPORTANT:

Inspection and Maintenance Log at the back of this manual.

FORM NO: 5903698

REV: B

ROOF TOP COUNTERWEIGHT ANCHOR SYSTEM 2100180

OR 2100185 WITH LIFTING KIT 2104190

USER INSTRUCTION MANUAL

This instruction 5903698 must

6 - Counterweights

4 - Lifting Kit Bracket (4) 5 - Black Rubber Coated Base Weights

7 - Lifting Kit Webbing (4)