galant 6160EX Instructions pour l'utilisateur - Page 16

Parcourez en ligne ou téléchargez le pdf Instructions pour l'utilisateur pour {nom_de_la_catégorie} galant 6160EX. galant 6160EX 18 pages.

Imprimer la page

System Indications

In addition to the displays shown previously, the following fault
displays may appear on the keypad. If the fault cannot be rectified,
please contact your installer, explaining the exact detail on the display.
Keypad Display
Tamper ZN:xx
Line Fail
Comms Fail
NO AC
Batt Low/Fail
Keypad Lockout
RF Supervision
RF Low Batt
Call Engineer
Fire
Panic
Assistance

Keypad Tones

Continuous Tone on setting
Dual tone – other times
Rapid Pulsing
Long interrupted tone
Long Pulsed Tone
Meaning
A tamper fault has occurred on the zone shown.
The telephone line has a fault.
The system cannot communicate with the monitoring
station via the phone line.
The mains electrical supply has gone down.
The back-up battery is not serviceable.
5 wrong codes have been entered. The keypads will
lockout for 10 minutes. Do not touch the keypad
during this time, as this extens the time.
The system has lost the signal from a radio detector.
The battery on the radio detector on the zone number
shown has gone low. Contact your installer to have
this replaced.
Contact your installer to have the system checked.
Fire alarm is in progress.
Panic alarm is in progress.
The Assistance Hotkey has been pressed.
16
Exit timer running
Alarm/Fault Condition
Zone is open during exit time
Entry timer counting down
Fire Alarm